Industrial Vacuum Cleaner Parts

NilfiskCFM 118 industrial vacuum cleaner pleated sack filter, the standard filter for the CFM118 with a 360mm diameter container. Formerly SKU Z8-1...

NilfiskCFM 3707 industrial vacuum cleaner Nomex spark resistant pleated star filter for 560mm diameter containers. (This picture is only for illu...

Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner Gore-Tex PES heat resistant main sack filter for bakeries and ani...

Nilfisk GS83 and GM83 and the Nilfisk GB733 3 phase industrial vacuum cleaner Gore-Tex main filter for finer filtration. I've used a photo of the N...

Now no longer available, the complete item comprising of the blue diffuser bag SKU 41225300, also obsolete, complete with steel bayonet and rubber ...

NilfiskCFM 70mm hose industrial vacuum cleaner to quick connect adaptor. Used to connect soft accessories such as the rubber gulper, in the foregro...

NilfiskCFM 70mm container inlet, stainless steel reducer to hose with 50mm internal diameter. This part fits in the inlet to the NilfiskCFM127 and ...

NilfiskCFM T40 W Infiniclean Constant Suction Industrial Vacuum Cleaner antistatic Polyester conical pleated filter cartridge five are needed per s...

No longer available, this 16,000 cm2 tightly woven cotton pleated main filter, with huge surface area, for the Nilfisk GM626 Industrial Vacuum Clea...

NilfiskCFM127 and the NilfiskCFM137 and the NilfiskCFM S2 and the NilfiskCFM S3 industrial vacuum cleaner with 460mm wide bodies, oversized main fi...

NilfiskCFM 118 industrial vacuum cleaner and the NilfiskCFM127 Earthed 3 Wire Two Stage 230Volt 1000 Watt Bi-Pass Vacuum Motor. There's one in a si...

Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner fixed floor nozzle for vacuuming large warehouses and workshops. ...

NilfiskCFM 100 litre 460mm container diameter ring for ease of emptying by forklift. It's just the lower part that goes around the container, not t...

NilfiskCFM 40mm continuous suction nozzle. It's also available in 50mm SKU Z7-2205 and 70mm SKU Z7-22055 This is for vacuuming large heaps of mater...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the GB826 and the oval Nilfisk GB725 3 Ph Industria...

NilfiskCFM127 industrial vacuum cleaner handle central body cover for the release latch trigger that connects to the cable. This is Obsolete and No...

This is for the opposite side of the frame as SKU Z8-18505D It's a pivot point for the handle articulation that raises and lowers the dust containe...

NilfiskCFM 175 litre 560mm container diameter ring bracket for ease of emptying by forklift. It's the actual bracket that's suspended from the tine...

The Nilfisk-ALTO Attix 965-21 SD XC industrial vacuum cleaner and the Nilfisk IVB9 float kit to allow for wet use. This device allows the Nilfisk-A...

TWO ONLY LEFT! Nilfisk and Tellus 373mm replacement brush strip Use 4 of these 373mm long brushes for 750mm Wide Fixed Floor Nozzles as fitted to t...

NilfiskCFM127 industrial vacuum cleaner rear pushing handle and the lever, for lifting and lowering the dust container Obsolete and No Longer Avail...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the Nilfisk GB726 3 Ph Indust...

NilfiskCFM 460mm diameter integral unloading ring for continued emptying. At the moment standard postage within Australia, is capped at a maximum o...

The Nilfisk GS82 and GM82 Industrial Vacuum Cleaner base dust container with no fittings such as wheels and handles and clips. No longer available,...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the oval Nilfisk GB725 3 Ph I...

Nilfisk and Tellus GA73 and the Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner and the Nilfisk GB833 industrial ...

Tellus and the Nilfisk GA72 and the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner and the Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk...

Nilfisk and Tellus GS82 and GM82 industrial vacuum cleaner wheel kit, it contains both the fixed and swivel wheels and axle. At the moment standard...

NilfiskCFM127 industrial vacuum cleaner handle release cable to lower and lift the dust container to and from the ground. Obsolete and No Longer Av...

NilfiskCFM Grill and Depressor Hose. This helps to equalise pressure difference on dustbags when using the plastic dust sacks on hazardous and nuis...