Industrial Vacuum Cleaner Parts

NilfiskCFM industrial vacuum cleaner 50mm chrome steel wand, it fits into the hose cuff and down to the quick release fitting on the floor tool. Th...

X Flap KIT for the Nilfisk-Alto Xtreme Clean 560-21XC and the Nilfisk-Alto Xtreme Clean 761-21XC and the Nilfisk IVB 5 Wet and Dry Vacuum Cleaner  ...

NilfiskCFM 50mm hose industrial vacuum cleaner to quick connect adaptor. Used to connect soft accessories such as the rubber gulper, in the foregro...

NilfiskCFM 70mm container inlet, steel reducer to hose with 50mm internal diameter. This part fits in the inlet to the NilfiskCFM127 and the Nilfis...

Three phase Industrial vacuum cleaner poly vee drive belt for turbines, such as on the Nilfisk GB933 3 phase industrial vacuum cleaner and the Nilf...

This is the black cover on top of the Nilfisk IVB5 Series Of Vacuum Cleaners and the Nilfisk IVB7 Series Of Vacuum Cleaners as well as both the Nil...

NilfiskCFM127 and 137 industrial vacuum cleaner black motor top cover. This motor top cover is for both the CFM127 and the NilfiskCFM137  At the mo...

NilfiskCFM 100 litre 460mm container diameter ring bracket for ease of emptying by forklift. It's the actual bracket that's suspended from the tine...

Tellus and the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner fixed floor nozzle (FFN) short 355mm and very flexible connection hose. Please be a...

The Nilfisk GS82 and GM82 Industrial Vacuum Cleaner  grey fender ring and container seal around middle of the container as can be seen in the photo...

The NilfiskCFM 460mm cyclone pre-separator lid with 100mm fittings, is put on top of the separator drum between the vacuum cleaner unit and where t...

NilfiskCFM 70mm hose industrial vacuum cleaner to quick connect adaptor. Used to connect soft accessories such as the rubber gulper, in the foregro...

NilfiskCFM 70mm container inlet, stainless steel reducer to hose with 50mm internal diameter. This part fits in the inlet to the NilfiskCFM127 and ...

NilfiskCFM T40 W Infiniclean Constant Suction Industrial Vacuum Cleaner antistatic Polyester conical pleated filter cartridge five are needed per s...

No longer available, this 16,000 cm2 tightly woven cotton pleated main filter, with huge surface area, for the Nilfisk GM626 Industrial Vacuum Clea...

NilfiskCFM127 and the NilfiskCFM137 and the NilfiskCFM S2 and the NilfiskCFM S3 industrial vacuum cleaner with 460mm wide bodies, oversized main fi...

NilfiskCFM 118 industrial vacuum cleaner and the NilfiskCFM127 Earthed 3 Wire Two Stage 230Volt 1000 Watt Bi-Pass Vacuum Motor. There's one in a si...

Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner fixed floor nozzle for vacuuming large warehouses and workshops. ...

NilfiskCFM 100 litre 460mm container diameter ring for ease of emptying by forklift. It's just the lower part that goes around the container, not t...

NilfiskCFM 40mm continuous suction nozzle. It's also available in 50mm Pn. Z7-2205 and 70mm Pn. Z7-22055 This is for vacuuming large heaps of mater...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the GB826 and the oval Nilfisk GB725 3 Ph Industria...

Nilfisk GB933 3 phase industrial vacuum cleaner and the Nilfisk GB1033 3 phase industrial vacuum cleaner shaker kit, it fits in the side, just off ...

NilfiskCFM127 industrial vacuum cleaner handle release body cover part, in the centre of the handle where the trigger is, there's one part each sid...

This is for the opposite side of the frame as Z8-18505D It's a pivot point for the handle articulation that raises and lowers the dust container on...

NilfiskCFM 175 litre 560mm container diameter ring bracket for ease of emptying by forklift. It's the actual bracket that's suspended from the tine...

NilfiskCFM127 industrial vacuum cleaner rear pushing handle and the lever, for lifting and lowering the dust container. At the moment, standard pos...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the Nilfisk GB726 3 Ph Indust...

NilfiskCFM 460mm diameter integral unloading ring for continued emptying. At the moment, standard postage within Australia is capped at a maximum o...

The Nilfisk GS82 and GM82 Industrial Vacuum Cleaner base dust container with no fittings such as wheels and handles and clips. No longer available,...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the oval Nilfisk GB725 3 Ph I...

Nilfisk and Tellus GA73 and the Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner and the Nilfisk GB833 industrial ...

Nilfisk and Tellus GS82 and GM82 industrial vacuum cleaner wheel kit, it contains both the fixed and swivel wheels and axle. At the moment standard...

NilfiskCFM127 industrial vacuum cleaner handle release cable to lower and lift the dust container to and from the ground. The part is now obsolete ...

The Tellus GA72 and the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner and the Nilfisk GS83 and GM83 and the Nilfisk GM625 Industrial Vacuum Clean...

NilfiskCFM Grill and Depressor Hose. This helps to equalise pressure difference on dustbags when using the plastic dust sacks on hazardous and nuis...