Vacuum Cleaner Hose Parts and Hose Cuffs

Nilfisk industrial vacuum cleaner spark arrestor for quenching sparks before the vacuum cleaner filter. The body is plastic with a metal plate in t...

This good looking, chromed, screw on 32mm bent tube, fits many similar vacuums with 32mm fittings and accessories, such as Nilfisk ALTO Vax, Numati...

NilfiskCFM 70mm container inlet, steel reducer to hose with 50mm internal diameter. This part fits in the inlet to the NilfiskCFM127 and the Nilfis...

NilfiskCFM 50mm cream coloured PVC hose cuff for the NilfiskCFM127 and the NilfiskCFM137 also the NilfiskCFM S2 and the NilfiskCFM S3 Used on both,...

Bent tube pistol grip for 32mm vacuum hose with a convenient air regulator trigger for the Electrolux Euroclean and Nilfisk UZ934 Cubit Terrier Vac...

38mm Plastic Hose Joiner Suitable for long hoses. Well-suited for car yards and car and truck rental agencies as well as other industrial and comme...

Complete male bayonet hose cuff for the container end of the 32mm non-tapered vacuum hose of the Nilfisk VP300 HEPA and the Nilfisk VP300 Eco Befor...

38mm PVC GVAC hose cuff. Screws on the 48mm O/D and 38mm I/D GVAC hose Pn. GARHG38 used on carpet extraction machines. They're for connecting the s...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

NilfiskCFM industrial vacuum cleaner 70mm to 40mm steel reducer for hoses. This usually fits in the 70mm container inlet of NilfiskCFM127 and the N...

NilfiskCFM 50mm hose industrial vacuum cleaner to quick connect adaptor. Used to connect soft accessories such as the rubber gulper, in the foregro...

NilfiskCFM 40mm black antistatic rubber hose cuff for the NilfiskCFM 118 industrial vacuum cleaner and other smaller industrial CFM vacuum cleaners...

NilfiskCFM industrial vacuum cleaner 40mm hose/tool adapter to quickly connect 40mm hoses to the round brush or crevice tool. It's outside diameter...

Nilfisk and Tellus grey plastic bayonet ONLY for the connection of the hose that fits Into the base of the Nilfisk and Tellus GM80  and the Nilfisk...

Nilfisk and Tellus GM80 and GS80 and Nilfisk GM90 and GS90 commercial vacuum cleaner, lower dust container, hose connection and dustbag spout. This...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

Nilfisk-ALTO and WAP branded wet and dry commercial and industrial vacuum cleaner hose CHROME 36mm bent tube with quick release connection for trad...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

This is a 36mm tapered screw-on swiveling hose cuff that connects with a push fit to bent tubes and round brushes etc. on upright vacuum cleaners s...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...