All

Packet of 5 paper Starbag dustbags for the complete range of Nilco West German made commercial upright vacuum cleaners. Including the Cleanstar bra...

NilfiskCFM industrial vacuum cleaner 40mm hose/tool adapter to quickly connect 40mm hoses to the round brush or crevice tool. It's outside diameter...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

NilfiskCFM 50mm hose industrial vacuum cleaner to quick connect adaptor. Used to connect soft accessories such as the rubber gulper, in the foregro...

NilfiskCFM127 and the NilfiskCFM137 and the NilfiskCFM S2 and the NilfiskCFM S3 industrial vacuum cleaner standard main pleated filter with 12 plea...

NilfiskCFM127 and the NilfiskCFM S2 and the NilfiskCFM S3 and the NilfiskCFM137 industrial vacuum cleaner 12 pleat standard filter with 460mm wide ...

NilfiskCFM industrial vacuum cleaner 70mm to 40mm steel reducer for hoses. This usually fits in the 70mm container inlet of NilfiskCFM127 and the N...

NilfiskCFM 40mm black antistatic rubber hose cuff for the NilfiskCFM 118 industrial vacuum cleaner and other smaller industrial CFM vacuum cleaners...

NilfiskCFM industrial vacuum cleaner 40mm tough rubber cone for cleaning in tight spaces, and around machines turretts and headstocks to avoid dama...

NilfiskCFM industrial vacuum cleaner 400mm x 50mm wheeled floor nozzle WFN with rubber lips. The clearance height of the lips can be adjusted by th...

NilfiskCFM 118 industrial vacuum cleaner 3m x 40mm commercial plastic vacuum cleaner hose with plastic cuffs. Suitable for most commercial and ligh...

NilfiskCFM industrial vacuum cleaner 40mm x 100mm round brush, very tough with replaceable natural bristle plinth. The photo is of the 50mm x 100mm...

NilfiskCFM industrial vacuum cleaner double pole green illuminated push switch for each motor on the NilfiskCFM127 and the NilfiskCFM137 SAFETY WAR...

NilfiskCFM industrial vacuum cleaner 50mm hard rubber cone for cleaning tough, narrow, spaces such as lathe and milling machine beds in machine sho...

NilfiskCFM 50mm industrial vacuum cleaner quick connect fitting. This allows 50mm floor tools to be used direct from a 50mm hose. It has the quick ...

Nilfisk-ALTO and Gerni hobby use pressure washer hose machine end adaptor M21 x 1.5mm x 3/8 (250 bar 3,500 PSI) This screws on to the threaded high...

Obsolete and No Longer Available, This was a kit of 3 water seals for the pump cylinders for an  ALTO Speed 4050 X-TRA Cold Water Pressure Washer. ...

The Nilfisk-Alto ATTIX 44-2L IC InfiniClean Wet and Dry Dust Extractor Brochure HERE  Fact sheet HERE The new Attix 44 dust extractor for profess...

Nilfisk-ALTO Attix 5 and 7 commercial and industrial wet and dry vacuum cleaner "workshop hose set" It consists of a 4m long plastic hose with a to...

Nilfisk-ALTO Attix commercial and industrial wet and dry vacuum cleaner 36mm rubber gulper or "Flat Nozzle" as the label refers to it as. At the mo...