38mm Accessories

Nilfisk and Tellus genuine complete black quality plastic tapered 32/38mm vacuum cleaner hose. Excellent value, very flexible, static free, complet...

The WAP Nilfisk-ALTO Anti-static hose for connection from the vacuum to power tools 27mm x 3.5m They are generally referred to as dust extraction h...

The Nilfisk-ALTO anti-static tool adapter cuff SIMILAR to the CURRENT ONE on the very flexible 27mm anti-static plastic hose SKU 107406091 which ca...

Obsolete and No Longer Available, choose SKU 22409100 The Nilfisk and Tellus plastic bayonet rubber muff retaining ring for the connection of the h...

Nilfisk and Tellus vacuum hose bayonet repair kit for the dustbag container end of the hoses fitted to the Nilfisk and Tellus GA70 and the Nilfisk ...

Nilfisk aluminium 38mm x 400mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners as supplied with the Nilfi...

38mm internal diameter heavy duty industrial vacuum cleaner black PVC Bar Flo hose per metre length. (Heavier than Industrial Duty PN. 99738002) Th...

Original Nilfisk and Tellus 38mm to 32mm steel reducer with grey plastic friction ring. Usually for using 32mm wands and accessories on 38mm bent t...

Nilfisk 40cm grey rubber lips for the original aluminium wheeled floor nozzle, same as the one in the photo, and supplied with 10 screws. They are ...

Nilfisk and Tellus GM80 tapered commercial vacuum cleaner grey hose with ball end but NO bent tube. This is the same hose as SKU 12097500, but with...

38mm PVC GVAC hose cuff. Screws on the 48mm O/D and 38mm I/D GVAC hose Pn. GARHG38 used on carpet extraction machines. They're for connecting the s...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

Nilfisk 1 meter x 38mm aluminium vacuum cleaner overhead cleaning wand for cleaning potentially combustible explosive dust dust from roof pipe and ...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

Nilfisk branded tough plastic commercial dry and wet pick up vacuum cleaner hard floor tool 38mm tube diameter and 400mm wide sweep path complete w...

Nilfisk 38mm commercial black anti-static vacuum cleaner hose per meter It is used with the Nilfisk IVB series of industrial wet and dry vacuum cle...

Obsolete and No Longer Available, the Nilfisk 38mm Electrolux Euroclean style aluminum bent tube for 38mm plastic hose for the larger original Euro...

Nilfisk and Tellus industrial vacuum cleaner hose 38mm conductive rubber muff and steel ring kit. These are usually used on the 38mm green conducti...

Nilfisk bayonet kit for the base and dust bag container of the Nilfisk and Tellus GM80 the Nilfisk GM90 and GS90 and the Nilfisk and Tellus GA71 GS...

Nilfisk industrial vacuum cleaner 38mm curved brush for cleaning away sticky dusts from overhead ducts and pipes, up to 100mm in diameter. Good hou...

Nilfisk original green conductive rubber wire compete reinforced tapered industrial vacuum cleaner hose from 38 to 32mm. Note: for the photo I used...

Nilfisk-Advance AX410 on-board upholstery hand extraction tool for cleaning chairs and furniture. Stainless Steel upholstery tool with a single Jet...

The WAP and Nilfisk-ALTO polished stainless steel and brass upholstery tool for cleaning seats and chairs in hotels, aged care facilities, churches...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...

No longer available separately, Nilfisk and Tellus bayonet fitting rubber muff for the connection of the hose that fits Into the base of the Nilfis...

38mm soft grey genuine Nilfisk plastic cone. This is used as original equipment on the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum clea...

Nilfisk and Electrolux Euroclean large commercial wet and dry vacuum cleaners 38mm hose cuff tank end. This is the 38mm tank end plastic hose cuff ...

NilfiskCFM 38mm clear antistatic EOLO hose by meter length. This clear hose with a cream spiral and built-in copper conductor, has a 38mm inside di...

This is a NilfiskCFM 38mm to 40mm black conductive hose cuff for industrial vacuum cleaners. The black conductive hose cuff is fitted on each end ...

Black plastic Multi-fit connector on the container end of the hose of the Nilfisk IVB3 and  Nilfisk IVB5 and the Nilfisk IVB7 wet and dry commercia...

Nilfisk branded wet and dry commercial and industrial vacuum cleaner hose stainless steel 38mm bent tube fits inside hose cuff of the Nilfisk IVB 9...

Very affordable 3meter flexible vacuum cleaner hose complete, for an extremly affordable option for the following vacuum cleaners the Nilfisk IVB3 ...

Budget 3meter x 38mm diameter flexible vacuum cleaner hose complete, for a more affordable option for the following vacuum cleaners the Nilfisk IVB...

Nilfisk IVB3 and the Nilfisk Grey-Line IVB5 M and the Nilfisk IVB7 M wet and dry industrial vacuum cleaner 38mm anti-static hose with ball ends but...

38mm aluminium wand for the Nilfisk and Electrolux Euroclean UZ878 wet and dry vacuum cleaner and the Nilfisk WD245 and the Electrolux IQ245 wet ...

Nilfisk original green bare 2 meter conductive rubber reinforced tapered industrial vacuum cleaner hose from 38mm metal ball end to 32mm metal ball...

Nilfisk 90 degree 1 meter x 38mm aluminium vacuum cleaner high cleaning wand for cleaning dust from roof pipe and RSJ girders, also high beams in c...

Nilfisk 38mm chrome steel ball end fitting for repairing or custom making 38mm industrial vacuum cleaner hoses Such as used on the Nilfisk GM80 and...

Nilfisk 38mm diameter tough 56cm long chrome steel wand for the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and the Nilfisk GM6...

Nilfisk 38mm industrial anti-static hose kit for the Nilfisk IVB3 M and the Nilfisk Grey-Line IVB5 M and the Nilfisk IVB7 M wet and dry industrial ...

Nilfisk and Tellus industrial vacuum cleaner 38mm x 70mm turnable round brush for using on the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner and ...

Nilfisk GV920 and the Nilfisk GV940 Series and GWD1040 wet and dry commercial vacuum cleaner 360mm wide floor tool with black nylon bristles for dr...

Nilfisk and Tellus industrial vacuum cleaner 38mm black rubbery gulper nozzle with tough black plastic 38mm neck for cleaning CNC lathes, drills a...