Professional & Domestic Cleaning Equipment Sales & Service
Cart 0
NilfiskCFM 70mm x 50mm x 50mm x 50mm Trifurcation Reduction X Joint For 3 x 50mm Hoses

NilfiskCFM

NilfiskCFM 70mm x 50mm x 50mm x 50mm Trifurcation Reduction X Joint For 3 x 50mm Hoses

$390.00
Style: Z7-22259 $413.00

Nilfisk-CFM 70mm x 50mm x 50mm x 50mm Trifurcation Reduction X Joint

This NilfiskCFM galvanised Trifurcation joint is an X piece of ducting that fits in the 70mm inlet of the following equipment for three 50mm hoses to be used at one time by three operators, usually to clean down dusty areas in production areas.

1. NilfiskCFM industrial vacuum cleaners with 70mm inlets.

2. NilfiskCFM Cyclone Pre-separator lid, (for very fine dust) which can be fitted on top of the separator drum between the vacuum cleaner unit and where the bulky, or fine particled debris, or product is being picked from.

3. NilfiskCFM 50 litre or 100 litre pre-separators with lids with 70mm inlets which can be fitted on top of the separator drum between the vacuum cleaner unit and where the bulky, or fine particled debris, or product is being picked from.

There are other sizes and configurations available.

At the moment, standard postage within Australia is capped at a maximum of $20! Maximise the saving on postage and buy some of the other related parts below, such as dustbags the filters a new hose or a new floor tool or other nozzles and accessory for your industrial vacuum cleaner.