NILFISK OIL230 Oil and Chip Recovery 230V Single Phase Industrial Vacuum Cleaner - Contact Us For Price
NILFISK OIL230 Oil and Chip Recovery Single Phase Industrial Vacuum Cleaner
The Nilfisk OIL230 oil and chip recovery single phase vacuum, is a new high spec coolant management machine for the metalworking industry, where valuable CNC machines tools are used. Factsheet HERE and Brochure HERE Find The "All-In-One" Family Brochure HERE
In common with the other NilfiskCFM oil management vacuums, the OIL230 can also collect metal chips, oily cuttings, lubricants and coolant spills.
Without having to dismantle the machine, the stainless steel chip-basket is at belt height for easy access and safer, easier ergonomic handling access.
Note: Stringy swarf is always difficult to vacuum up, it very easily gets stuck in hoses etc and is always easier to remove with a gloved hand
Designed for uninterrupted workflow, vacuuming and discharge can carried out by a single operator, thanks to the practical gun clamp.
Van-friendly height 1.45m as well as being compact and mobile it's easy to manouver.
Onboard tool and hose storage helps keep everything together and can hold the discharge hose steady to fill a drum or IBC
The Nilfisk OIL230 has a mechanical float system for automatic overfill protection.
To effectively cool the cutting tool during manufacturing, the correct coolant, is directed on to the cutting area. These coolants can be especially expensive, if it goes "bad" due to bacteria and cannot be re-used.
The main function of the OIL230 is to separate the lubricant/oil/coolant from the metal swarf and recover the liquids.
Managing the coolant can be done very quickly. The swarf is retained into a mesh basket and the liquid is collected into the main tank and a mechanical float will stop the machine vacuuming, once the maximum level is reached.
The main advantage is the cost saving, from keeping the coolant clean and fresh reducing the risk of dermatitis to operators, as well as preventing foul odours in the machine-shop. The coolant will last longer, work quality will improve, and expensive CNC machine tools will last longer.
Another use could be removing oil from transformers and high voltage circuit breakers in the electricity generation and distribution industry.
* Rated Power: 3.2kW * Supply Voltage: 230V @ 50Hz * Cord Length: m
* Collection Type: Wet * Oil Capacity: 70Lit * Chip Capacity: 27Lit
* Airflow: 94 Lit/Sec * Depression: 21kPa * Inlet Diameter: 70mm
* Dimensions: 81cm Long x 64cm Wide x 145cm High Mass: 90kg
* Prot Class: IP44 * Sound Pressure Level: @ 1.5m 72dB(A) (ISO 3744)
Maximise the FREE FREIGHT offer on this item, on our website, anything purchased along side it, such as in the related items below, will also be shipped free, Australia wide!