Nilfisk MH 3C 145/600 PA Compact Single Phase Electric Hot Water Pressure Washer
Nilfisk MH 3C 145/600 PA Compact HOT Water Pressure Cleaner
Click HERE For Partslist Click HERE For Brochure Click HERE For Factsheet
Innovative compact mobile hot water high pressure washers with four large wheels making it a highly mobile unit with high performance and great reliability.
The Nilfisk MH 3C 145/600 PA is ideal for everyday, hot water cleaning tasks in the automotive segment, for tradesmen commercial kitchens or around stations and farms.
The Nilfisk MH 3C 145/600 PA ensures low cost of cleaning with reduced running costs, easy storage and a high level of reliability thanks to the many safety functions and professional materials used.
This package includes: Includes:
101119496 Ergo Coupling Kit
106404529 Coupling Male/Female 3/4”
301002275 - 10 Metre DN6 Single Wire Hose
1 x 106403122 ERGO 2000 Spray Gun with Hose Swivel
106403036 Universal Plus 940 Bent Lance without nozzle
101119735 Tornado Nozzle 0340 Indication Ring Violet
- Power Consumption at 230 Volt 3.4 kWatt Current 14.5 Amperes 5 meter cord.
- EcoPower boiler with > 92% efficiency.
- 2800 RPM long life pump with 3 ceramic pistons and brass cylinder head.
- 2100 PSI 145 Bar Cleaning Impact 2.6 kg/Force
- Water Flow 10 LPM QMAX 8.3 LPM QIEC
- Max water inlet temp 40C
- Max Water Temp 80C Max Steam Temp 150C
- Compact upright design for good mobility on a robust steel frame.
- 17 litre fuel tank and fuel consumption 1.8 Lit/Hr
- Flue gas sensor and flame sensor and low fuel alarm for safety.
- Pressure activated unloader system.
- Easy to use control panel.
- On-board diagnostic function.
- Duo Motor system.
- Automatic delayed Stop/Start
- High pressure detergent with removable 5 litre detergent tank.
- "QuickService" concept for reduce running costs with "Service" indicator
- 12 month warranty.
- 10m DN6 HP hose Ergo 2000 gun with Universal Plus 1080 lance and 0340 Tornado Plus nozzle with Violet indicator ring
- Sound Level; 77 dB(A)
- Dimensions; 101cm Long x 70cm Wide x 102cm High Mass; 115kg
OPERATING INSTRUCTIONS
- Don't use turbo lance above 80 degrees (Opposite the off position on the main switch).
- Don't use a surface cleaner above 60 degrees
- Check the fuel level before use.
- Check the detergent container is full, and the dial turned off.
- Pre-select the desired temperature.
- If the steam is to be used, set the temperature to maximum and back off the steam dial which is found next to the pressure guage two turns anti-clockwise.
- Then switch on the unit.
IMPORTANT
WHEN HOT WATER / STEAM HAS BEEN USED AND UNIT IS NOT BEING USED FOR AT LEAST 10 MINUTES, TURN THE TEMPERATURE DIALS DOWN AND FLUSH UNIT THROUGH WITH COLD WATER UNTIL THE LANCE IS COLD.
Hot water units should only be used for a maximum of 2 hour at a time before resting for at least one hour, with power and water supplies turned off.
Maximise the FREE FREIGHT offer on this item, on our website, anything purchased along side it, such as in the related items below, such as extra filters, fittings or accessories or extra hose, will also be shipped free, Australia wide!