Nilfisk and Tellus GS and GM Motor Commercial/Industrial Replacement HEPA Filter
These Are The Correct Replacement HEPA Filter Cartridge For Industrial and Commercial Use. They are used on Nilfisk GSD Motors pods and GM Motor pods on the industrial and commercial vacuum cleaners It's the part on the top left, and the box is on the top right.
They fit inside the HEPA filter cage Pn. 11731003 on top of the motor.
They are mainly used on the Nilfisk GM80 Haz and the Nilfisk GS82 and GM82 Hazadous Dust Vacuum Cleaner and the Nilfisk GS83 Vacuum Cleaner
This should be replaced between 1 and 5 years depending on its usage.
Find the higher spec ULPA Filter HERE
The picture shows the packing carton and the top of the filter cartridge with its Serial Number on it. A good technician will write the date on it when he fits it. Bottom left is the cage, in which, the filter actually fits.
According to EN 60335-2-69 The Terms "TYPE H" FILTRATION and HEPA FILTRATION are NOT INTERCHANGEABLE
The HEPA classification only considers the "efficiency of filtration" eg H10, H11, H12, H13, H14, U15, and U17 NOT the SUITABILITY FOR USE with HAZARDOUS or COMBUSTIBLE dusts.
These particular filters have been used with asbestos and lead etc for many years.
At the moment, standard postage within Australia is capped at a maximum of $20! So maximise the saving on postage and buy some packets of dustbags, or a hose or a new floor tool, or some other accessories in the related items below!