Nilfisk GD1000 HDS2000 and GD910 Commercial Vacuum Container End Hose Cuff
Nilfisk GD1000 Series of vacuum cleaners, comprising of the Nilfisk GD1005 and the Nilfisk GD1010 and the Nilfisk Family 5 litre barrel vacuum cleaner and the Nilfisk Business 10 litre commercial vacuum cleaner and the Nilfisk HDS2000 commercial vacuum cleaner and the Nilfisk GD910 and the Nilfisk GD911 Battery Powered Barrel Vacuum Cleaner and the Nilfisk VP300 HEPA and the new Nilfisk VP600 H13 Commercial Vacuum Cleaner container end hose cuff, complete male bayonet fitting kit for machine end of hose. It was formerly Pn. 22366100
To fit it, depress the two dimples on the click ring, and remove the click ring.
Thread the click ring, large diameter end first, down the hose.
Take the round hull in your dominant hand, then screw that anticlockwise onto the hose.
Bring up the click ring to the hull.
Put the hull into the cuff body, then push the click ring into the cuff body behind the hull, and push the dimples so they locate in the two holes on the cuff.
Check the hose and hull rotate freely in the cuff.
Then offer the hose and cuff with rubber seal into the container and twist it clockwise to lock it into the body.
FYI The cuff has to be removed from the container to remove the dustbag.
At the moment, standard postage is capped at a maximum of $20 within Australia, so maximise the saving on postage and buy something in the related parts below!