Gerni MH 4M 200/960X Three Phase Electrical Hot Water 2900PSI Pressure Washer
GERNI MH 4M 200/960 Formerly NEPTUNE 4-50FAX 3 Phase Mobile Hot Water 2900 PSI Pressure WasherReplaced by Nilfisk MH 4M 200/960 in blue Factsheet HERE
Compact design with high performance - a simple, efficient cleaning tool.
The Gerni MH 4M 200/960 series continues to deliver high performance, ease of use, low noise and high cleaning efficiency in a three phase hot water pressure washer designed to be used for around FOUR HOURS PER DAY.
QuickService concept give low running and maintenance costs, robustness, durability and high cleaning efficiency.
Heating costs are reduced with the award winning EcoPower boiler ( > 92% efficiency). Sound level is reduced thanks to the 1450 rpm motor.
* Three Phase Electrical Power * 2,900 PSI Max Water Pressure
* Fully ceramic 3 piston pump. With brass cylinder head. *Stainless Steel Boiler Coil
* Easy to use control panel: all controls in one place.
* Ergo accessory system for additional user comfort.
* Cable Length; 5 meters * Power; 6.1 kW * Current; 12.3 Amps.
* Supply Voltage: 230V Three Phase. * Supply Frequency; 50 Hz.
* Water Flow: QMAX 16 Lit/Min QIEC 15 Lit/Min.
* Water Temperature (Water/Steam); 90/150C * Max Input Water Temp: 40C
* Pump: 1450 RPM 200 Bar/ 2,900 PSI * Cleaning Impact: 5 kg/force
* Fuel: Diesel. * Fuel Consumption; 4 kg/Hr.* Fuel Tank Capacity; 15 lits.
* Removable Detergent Tank Capacity; 10 litres.
* High Pressure Hose; 10 Meters DN6 single wire hose * Nozzle Size; 0500
* Mass; 150 kg * Dimensions; 1053 mm Long x 685 mm Wide x 760 mm High
* Standard Accessories; Ergo 2000 gun, Tornado nozzle Yellow Ring .0500 and Universal Plus 1120 straight lance.
- Don't use turbo lance above 80 degrees (Opposite the off position on the main switch).
- Don't use a surface cleaner above 60 degrees
- Check the fuel level before use.
- Check the detergent container is full, and the dial turned off.
- Pre-select the desired temperature.
- If the steam is to be used, set the temperature to maximum and back off the steam dial which is found next to the pressure guage two turns anti-clockwise.
- Then switch on the unit.
WHEN HOT WATER / STEAM HAS BEEN USED AND UNIT IS NOT BEING USED FOR AT LEAST 10 MINUTES, TURN THE TEMPERATURE DIALS DOWN AND FLUSH UNIT THROUGH WITH COLD WATER UNTIL THE LANCE IS COLD.
Hot water units should only be used for a maximum of 2 hour at a time before resting for at least one hour, with power and water supplies turned off.
Maximise the FREE FREIGHT offer on this item, on our website, anything purchased along side it, such as in the related items below, such as extra filters, fittings or accessories or extra hose, will also be shipped free, Australia wide!