nilfisk

Nilfisk and Tellus GM80 and the GS80 commercial and industrial vacuum cleaner H13 HEPA filter kit for hazardous and nuisance dusts such as asbestos...

Nilfisk and Tellus GS80 and GM80  and the Nilfisk GM90 and GS90 commercial vacuum cleaner motor replacement microfilter to protect the motor bearin...

NO LONGER AVAILABLE and replaced by SKU 11641000 for the Nilfisk GM90 and GS90 as well as Nilfisk and Tellus GM80 and GS80 commercial vacuum cleane...

Nilfisk GM90 and GS90 and GM80 and the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner re-wireable IEC appliance plug for the motor...

This is the handle for the Nilfisk GS and GM commercial vacuum cleaner motor HEPA filter OR the silencer that goes in the same cage housing. See ho...

Nilfisk and Tellus 15m long 2 core Double Insulated high viz orange for the Nilfisk GM90 and GS90 and GS80 and Nilfisk and Tellus GM80 and the Nil...

Nilfisk and Tellus 2 pole switch kit, for the 700 Watt GS80 GS90 and GS81 and other commercial vacuum cleaners using the 800 Watt Nilfisk and Tellu...

Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner fixed floor nozzle for vacuuming large warehouses and workshops. ...

Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner 750mm wide fixed floor nozzle (FFN) hook, it supports the nozzle ...

Nilfisk GS83 and GM83 Three Motor Industrial Vacuum Cleaner Obsolete and no longer available, however a few parts are still available from this web...

Nilfisk and Tellus GS90 and GM90 and the G90 Allergyvac and Contractor vacuum cleaner clips set of two. They fit at the front and back of the conta...

2,000 cm2 Cotton Main Filter For Nilfisk and Tellus GM90 and GS90 and G90 Allergyvac as well as the "Mini Merc Vac"  for Mercury. It's now Obsolete...

Nilfisk GSD 700 Watt Motor-Head Now Obsolete. Previously Used in Older GS Machines This fully serviceable motor, was for a long time, used in the T...

Nilfisk and Tellus GSD Motors and Nilfisk and Tellus GAD and GAE motor vacuum cleaner motor carbon brush and spring THEY ARE NOW OBSOLETE AND UNAVA...

This motor fan unit support cradle is fitted in the Nilfisk and Tellus GMP motor heads 12112153 and the 800 Watt Nilfisk and Tellus GSP motor head ...

Narrow grey 500mm lip (2) kit for the original Nilfisk and the Tellus 50mm aluminium wheeled floor nozzle (WFN) fitted to the Nilfisk GS82 and GM82...

Nilfisk and Tellus industrial vacuum cleaner 38mm black rubbery gulper nozzle with tough black plastic 38mm neck for cleaning CNC lathes, drills a...

Original Nilfisk 3m x 50mm Green conductive rubber, wire reinforced BARE hose with steel ball ends. These were supplied with the hose kits for the ...

Nilfisk industrial vacuum cleaner 50mm black rubbery gulper nozzle with tough black plastic 50mm neck for cleaning CNC lathes, drills and milling m...

Nilfisk and Tellus 50mm rubber and plastic industrial vacuum cleaner round brush for the very popular Nilfisk GS82 and GM82 Industrial Vacuum Clean...

Original Nilfisk and Tellus industrial vacuum cleaner 50mm bluey/grey rubber right angled gulper for cleaning around CNC lathes, drilling and milli...

Original Nilfisk and Tellus industrial vacuum cleaner 50mm tough, short tapered bluey/grey rubber cone for gentle cleaning in gaps and crevices. Si...