Nilfisk

The Electrolux Euroclean and Nilfisk UZ934 Cubit Terrier Vacuum Cleaner  pack of 10 paper dustbags. I suggest these dustbags are UNDERPRICED so buy...

This is the 32mm tank end plastic hose cuff for the Nilfisk GD934 which was formerly the Electrolux Euroclean UZ934 Terrier and Cubit  commercial v...

Pleated main dust filter for the Electrolux Euroclean and Nilfisk UZ934 Cubit Terrier Vacuum Cleaner this goes inside the dustbag container on the ...

Dustbag lock washers packet of three that holds the dustbag in place on the inlet spout for the Electrolux Euroclean and Nilfisk UZ934 Cubit Terrie...

Electrolux and the Nilfisk UZ934 Cubit Terrier Vacuum Cleaner pack of 5 exhaust filters. These are a packet of 5 white rectangular exhaust filters....

Nilfisk WD215 and WD225 and Electrolux Euroclean IQ215 and IQ225 wet and dry vacuum cleaners and the Nilfisk WD245 and the Electrolux IQ245 wet and...

No longer available in Bunnings. This is the Nilfisk packaged item, who is the parent of the Gerni branded domestic pressure washer 7 meter high pr...

This is a single 5.28 x 1.78 90 SH Nitril "O" ring. One of it's purposes is for the short HP high pressure hose from the outlet to the pump, to the...

Nilfisk branded and Gerni(Consumer) cold water pressure washer Click and Clean G4 long lance complete. formerly Pn. 126481135 and before that Pn. 6...

Repair Kit for the Fuel Injector for Poseidon 8.  As it's light, maximise the saving on postage and buy some of the related parts below. Or buy som...

Nilfisk branded Click and Clean 15 meter rubber coated steel braided 200BAR 20kPa 2900PSI Superflex pressure hose for the Nilfisk 160.2-15 POWER PL...

This is a single 9.3 x 2.4 90 SH Nitril "O" ring. It's for the male click&clean part of the lance that goes into the pistol grip. It's used on ...

Light domestic use electric powered cold water pressure washer clean water in-line inlet strainer for the Nilfisk and Gerni (Consumer) Gerni Super ...

Nilfisk and Gerni (Consumer) Gerni Super 140.2 Plus and the Gerni Super 145.2 and the Gerni Super 140.2 Plus domestic cold water electric pressure ...

Nilfisk and Tellus original 32mm plastic upholstery nozzle for vacuum cleaners. This is the Nilfisk genuine original grey two part upholstery nozzl...

Original Nilfisk 32mm rubber muff kit for the best quality tapered rubber, braided, or plastic vacuum cleaner hoses, usually fitted to the Nilfisk ...

Nilfisk 32mm premium chrome steel telescopic wand. It fits most commercial vacuum cleaners and is supplied with Nilfisk HDS2000 commercial vacuum c...

Nilfisk aluminium 32mm x 300mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners. Usually supplied with the...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

Nilfisk 38mm industrial vacuum cleaner hose steel bayonet kit. Usually fitted on the green conductive rubber hoses that were supplied with the indu...

Nilfisk 38mm chrome steel ball end fitting for repairing or custom making 38mm industrial vacuum cleaner hoses Such as used on the Nilfisk GM80 and...

Nilfisk 38mm diameter tough 56cm long chrome steel wand for the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and the Nilfisk GM6...

Nilfisk and Tellus original aluminium 38mm x 400mm adjustable wheeled floor nozzle as supplied with the industrial vacuum cleaners such as the Nilf...

Nilfisk aluminium 38mm x 400mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners as supplied with the Nilfi...

Nilfisk original green bare 2 meter conductive rubber reinforced tapered industrial vacuum cleaner hose from 38mm metal ball end to 32mm metal ball...

Nilfisk bayonet kit for the base and dust bag container of the Nilfisk and Tellus GM80 the Nilfisk GM90 and GS90 and the Nilfisk and Tellus GA71 GS...

Nilfisk cable clamp kit for securing the commercial vacuum cleaner Powerheads cord, to the vacuum cleaner hose and wand. Probably the LAST SET EVER...

Nilfisk original green conductive rubber wire compete reinforced tapered industrial vacuum cleaner hose from 38 to 32mm. Note: for the photo I used...

Nilfisk hose coupling kit, it connects the top quality grey plastic bent tube to the grey or black 32mm tapered hose on the Tellus and Nilfisk GM90...

Nilfisk double pole ( DP ) switch kit for the 1200 Watt Nilfisk and Tellus GMP motor heads 12112153 such as fitted to Nilfisk and Tellus GM80 and t...

Nilfisk Extreme  domestic vacuum cleaner front castor, sold in a PACKET OF ONE, see the second picture. Note: A Torx 20 (T20) screwdriver is requir...

Nilfisk Extreme domestic vacuum cleaner front double swivel wheel ONLY. No Longer Available you'll have to use Pn. 147-1040-500 instead. UPDATE sin...

Nilfisk and Tellus GA and GS and GM vacuum cleaner motor head Radio Frequency (RF) suppressor. These are second-hand, currently NONE LEFT! These RF...

The Nilfisk and Tellus GA70 and the Nilfisk and Tellus GM80 commercial vacuum cleaner container rubber seal and bumper ring. This is the thick, pro...