Vacuums - Parts & Accessories

Nilfisk and Tellus GS82 and GM82 and the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner lower container clip. In the photo it's ri...

Nilfisk industrial vacuum cleaner hose 50mm x 38mm steel reducer tube.This enables the 38mm wands and tubes to be used with the 50mm hoses by using...

NilfiskCFM Grill and Depressor Hose. This helps to equalise pressure difference on dustbags when using the plastic dust sacks on hazardous and nuis...

NilfiskCFM 100 litre 460mm container diameter ring for ease of emptying by forklift. It's just the lower part that goes around the container, not t...

NilfiskCFM127 industrial vacuum cleaner handle release cable to lower and lift the dust container to and from the ground. Obsolete and No Longer Av...

Nilfisk and Tellus GS82 and GM82 industrial vacuum cleaner wheel kit, it contains both the fixed and swivel wheels and axle. At the moment standard...

NilfiskCFM 40mm continuous suction nozzle. It's also available in 50mm SKU Z7-2205 and 70mm SKU Z7-22055 This is for vacuuming large heaps of mater...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the GB826 and the oval Nilfisk GB725 3 Ph Industria...

Nilfisk and Tellus GA73 and the Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner and the Nilfisk GB833 industrial ...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the oval Nilfisk GB725 3 Ph I...

The Nilfisk GS82 and GM82 Industrial Vacuum Cleaner base dust container with no fittings such as wheels and handles and clips. No longer available,...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the Nilfisk GB726 3 Ph Indust...

NilfiskCFM127 industrial vacuum cleaner rear pushing handle and the lever, for lifting and lowering the dust container Obsolete and No Longer Avail...

The Nilfisk-ALTO Attix 965-21 SD XC industrial vacuum cleaner and the Nilfisk IVB9 float kit to allow for wet use. This device allows the Nilfisk-A...

NilfiskCFM 175 litre 560mm container diameter ring bracket for ease of emptying by forklift. It's the actual bracket that's suspended from the tine...

This is for the opposite side of the frame as SKU Z8-18505D It's a pivot point for the handle articulation that raises and lowers the dust containe...

NilfiskCFM127 industrial vacuum cleaner handle central body cover for the release latch trigger that connects to the cable. This is Obsolete and No...

Nilfisk-CFM 70mm x 50mm x 50mm Bifurcation Reduction Y Joint This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 70mm in...

NilfiskCFM 175 litre 560mm container diameter ring for ease of emptying by forklift. It's just the lower part that goes around the container, not t...