Vacuums - Parts & Accessories

38mm black swivel PVC hose cuff for 38mm plastic hose as shown in the centre of the photo. Note: They were originally grey. These swivel hose cuffs...

38mm black round commercial vacuum cleaners plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diamet...

The Nilfisk-ALTO anti-static tool adapter cuff SIMILAR to the CURRENT ONE on the very flexible 27mm anti-static plastic hose SKU 107406091 which ca...

Nilfisk aluminium 38mm x 400mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners as supplied with the Nilfi...

Obsolete and No Longer Available, choose SKU 22409100 The Nilfisk and Tellus plastic bayonet rubber muff retaining ring for the connection of the h...

Nilfisk and Tellus vacuum hose bayonet repair kit for the dustbag container end of the hoses fitted to the Nilfisk and Tellus GA70 and the Nilfisk ...

Original Nilfisk and Tellus 38mm to 32mm steel reducer with grey plastic friction ring. Usually for using 32mm wands and accessories on 38mm bent t...

Nilfisk 40cm grey rubber lips for the original aluminium wheeled floor nozzle, same as the one in the photo, and supplied with 10 screws. They are ...

38mm Plastic Hose Joiner Suitable for long hoses. Well-suited for car yards and car and truck rental agencies as well as other industrial and comme...

38mm PVC GVAC hose cuff. Screws on the 48mm O/D and 38mm I/D GVAC hose Pn. GARHG38 used on carpet extraction machines. They're for connecting the s...

Nilfisk 1 meter x 38mm aluminium vacuum cleaner overhead cleaning wand for cleaning potentially combustible explosive dust dust from roof pipe and ...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

Nilfisk branded tough plastic commercial dry and wet pick up vacuum cleaner hard floor tool 38mm tube diameter and 400mm wide sweep path complete w...

Nilfisk industrial vacuum cleaner 38mm curved brush for cleaning away sticky dusts from overhead ducts and pipes, up to 100mm in diameter. Good hou...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...

38mm soft grey genuine Nilfisk plastic cone. This is used as original equipment on the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum clea...

No longer available separately, Nilfisk and Tellus bayonet fitting rubber muff for the connection of the hose that fits Into the base of the Nilfis...

Nilfisk and Tellus industrial vacuum cleaner hose 38mm conductive rubber muff and steel ring kit. These are usually used on the 38mm green conducti...