Vacuums - Parts & Accessories

 NilfiskCFM137 Industrial Vacuum Cleaner and the newer NilfiskCFM S3 industrial vacuum cleaner 230Volt 800Watt 2 stage bi-pass motor fan unit with ...

NilfiskCFM industrial vacuum cleaner 40mm 2 piece chrome steel wand for the NilfiskCFM 118 industrial vacuum cleaner wheeled floor nozzle. It fits ...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the  Nilfisk GB726 3 Ph Indus...

NilfiskCFM removable galvanised cyclone 460mm for the NilfiskCFM127 and the NilfiskCFM137 and the NilfiskCFM S2 and the NilfiskCFM S3 and the Nilfi...

The Tellus and the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner ORIGINAL CONFIGURATION top container with openings for the motors. This is the e...

CFM 560mm removable galvanised cyclone. It goes inside 560mm diameter filter containers and separators, to force light dusts down away from the fil...

NilfiskCFM127 industrial vacuum cleaner handle central body for the release latch trigger that connects to the cable. Obsolete and No Longer Availa...

Nilfisk and Tellus GS82 and GM82 and the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner lower container clip. In the photo it's ri...

NilfiskCFM Grill and Depressor Hose. This helps to equalise pressure difference on dustbags when using the plastic dust sacks on hazardous and nuis...

NilfiskCFM 100 litre 460mm container diameter ring for ease of emptying by forklift. It's just the lower part that goes around the container, not t...

NilfiskCFM127 industrial vacuum cleaner handle release cable to lower and lift the dust container to and from the ground. Obsolete and No Longer Av...

Nilfisk and Tellus GS82 and GM82 industrial vacuum cleaner wheel kit, it contains both the fixed and swivel wheels and axle. At the moment standard...

NilfiskCFM 40mm continuous suction nozzle. It's also available in 50mm SKU Z7-2205 and 70mm SKU Z7-22055 This is for vacuuming large heaps of mater...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the GB826 and the oval Nilfisk GB725 3 Ph Industria...

Nilfisk and Tellus GA73 and the Nilfisk GS83 and GM83 and the Nilfisk GB733 three phase industrial vacuum cleaner and the Nilfisk GB833 industrial ...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the oval Nilfisk GB725 3 Ph I...

The Nilfisk GS82 and GM82 Industrial Vacuum Cleaner base dust container with no fittings such as wheels and handles and clips. No longer available,...

The Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk GM626 Industrial Vacuum Cleaner and the Nilfisk GB826 and the Nilfisk GB726 3 Ph Indust...

NilfiskCFM127 industrial vacuum cleaner rear pushing handle and the lever, for lifting and lowering the dust container Obsolete and No Longer Avail...

TWO ONLY LEFT! Nilfisk and Tellus 373mm replacement brush strip Use 4 of these 373mm long brushes for 750mm Wide Fixed Floor Nozzles as fitted to t...

The Nilfisk-ALTO Attix 965-21 SD XC industrial vacuum cleaner and the Nilfisk IVB9 float kit to allow for wet use. This device allows the Nilfisk-A...

NilfiskCFM 175 litre 560mm container diameter ring bracket for ease of emptying by forklift. It's the actual bracket that's suspended from the tine...

This is for the opposite side of the frame as SKU Z8-18505D It's a pivot point for the handle articulation that raises and lowers the dust containe...

NilfiskCFM127 industrial vacuum cleaner handle central body cover for the release latch trigger that connects to the cable. This is Obsolete and No...

Tellus and the Nilfisk GA72 and the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner and the Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk...

NilfiskCFM 460mm diameter integral unloading ring for continued emptying. At the moment standard postage within Australia, is capped at a maximum o...