Vacuums - Parts & Accessories

NilfiskCFM127 and the NilfiskCFM137 and the NilfiskCFM S2 and the NilfiskCFM S3 and the NilfiskCFM T22 etc industrial vacuum cleaner 50mm steel cre...

Obsolete and Unavailable, the Nilfisk and Tellus original industrial vacuum cleaner 50mm steel crevice nozzle for the Nilfisk GM82 and the Nilfisk ...

NilfiskCFM industrial vacuum cleaner 400mm x 50mm bristle brush with it's neck at 30 degree angle, for cleaning up sticky dust, such as around powd...

OBSOLETE and No Longer Available, the Nilfisk 400mm x 50mm aluminium wheeled floor nozzle with adjustable rubber lips. There was a 500mm wide one a...

Nilfisk industrial vacuum cleaner 50mm black rubbery gulper nozzle with tough black plastic 50mm neck for cleaning CNC lathes, drills and milling m...

Original Nilfisk and Tellus industrial vacuum cleaner 50mm bluey/grey rubber right angled gulper for cleaning around CNC lathes, drilling and milli...

This is a NilfiskCFM 50mm black conductive hose cuff for the NilfiskCFM137 and the NilfiskCFM127 and the NilfiskCFM S2 and the NilfiskCFM S3 indust...

Nilfisk-CFM 70mm x 50mm x 50mm x 50mm Trifurcation Reduction X Joint This NilfiskCFM galvanised Trifurcation joint is an X piece of ducting that fi...

Nilfisk-CFM 50mm x 50mm x 50mm Bifurcation Reduction Y Joint This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 50mm i...

NilfiskCFM Inlet 50-40 CFM Iron Reducer, so the NilfiskCFM 118 industrial vacuum cleaner for example, can use the 40mm hoses. In the picture, it's ...

Nilfisk-CFM 50mm x 40mm x 40mm Bifurcation Reduction Y Joint This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 50mm ...

Nilfisk industrial vacuum cleaner hose 50mm x 38mm steel reducer tube.This enables the 38mm wands and tubes to be used with the 50mm hoses by using...

Nilfisk-CFM 70mm x 50mm x 50mm Bifurcation Reduction Y Joint This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 70mm in...

Nilfisk 50mm ball end for screwing on to the light threaded 50mm internal diameter hose for use with the Nilfisk muff system. It's the one, on the ...

Nilfisk 50mm industrial vacuum cleaner hose rubber protection rings. They're for protecting hoses from rough surfaces, for example in engineering w...

Nilfisk industrial vacuum cleaner hose 50mm chamfered short ball end. Used to repair or make 50mm hoses for the Nilfisk GM82 and the Nilfisk GM625 ...

Nilfisk industrial vacuum cleaner hose 50mm knurled long ball end. Used to repair or make 50mm hoses for the Nilfisk GS82 and GM82 Industrial Vacu...

Tellus and the Nilfisk GA72 and the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner and the Nilfisk GM625 Industrial Vacuum Cleaner and the Nilfisk...

Central ducted vacuum cleaner system 50mm white PVC plastic pipe flanged coupling to switched flap valves. This is for mounting the flap-valves or ...

Nilfisk 50mm Aluminium Flap Valve, For Industrial Ducted Systems. Fits 60mm OD ducting, and springs shut when the hose is removed. Second picture s...