[Okendo]_All products

Nilfisk Extreme X150 vacuum cleaner basic bent tube with sliding suction regulator. No electronic remote control. This bent tube also fits the Nilf...

Nilfisk Extreme X300 top of the range vacuum cleaner ergonomic, premium bent tube with remote control. This Nilfisk ERGODYNAMIC bent handpiece, has...

The Nilfisk and Tellus GS90 and GM90 vacuum cleaner and the Nilfisk GD1005 and the Nilfisk GD1010 as well as the Nilfisk HDS2000 commercial vacuum ...

Excellent quality 32mm vacuum cleaner hose bent end piece with a chrome tip. This bent end piece BEP, or pistol grip, fits the Nilfisk BV1100 backp...

Nilfisk-ALTO and WAP wet and dry commercial and industrial vacuum cleaner hose quick release cuff for the excellent quality stainless steel bent tu...

Nilfisk hose coupling kit, it connects the top quality grey plastic bent tube to the grey or black 32mm tapered hose on the Tellus and Nilfisk GM90...

Nilfisk-ALTO and WAP branded wet and dry commercial and industrial vacuum cleaner hose stainless steel 36mm bent tube with quick release connection...

This is the 32mm swiveling hose cuff that the 32mm stainless steel bent tube push-fits in to. It fits on the hose where you hold it with your hand ...

This good looking, chromed, screw on 32mm bent tube, fits many similar vacuums with 32mm fittings and accessories, such as Nilfisk ALTO Vax, Numati...

Bent tube pistol grip for 32mm vacuum hose with a convenient air regulator trigger for the Electrolux Euroclean and Nilfisk UZ934 Cubit Terrier Vac...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

This is a 36mm tapered screw-on swiveling hose cuff that connects with a push fit to bent tubes and round brushes etc. on upright vacuum cleaners s...

32mm Original Numatic Henry and Numatic Hetty commercial vacuum cleaner hose, top quality stainless steel bent end piece. In the main photo, it's t...

35mm Pistol Grip or Bent End Piece. It fits 35mm accessories onto the 32mm flexible black plastic vacuum hose. These are usually used on the Nilfis...

Nilfisk and Electrolux Panther GD930/S2 formerly Electrolux UZ930 Panther commercial vacuum cleaner aluminium 32mm bent tube for hose. The part at ...

Nilfisk 50mm chrome bent tube for the Nilfisk GS82 and GM82 Industrial Vacuum Cleaner and the Nilfisk GS83 and GM83 and the Nilfisk GM625 Industria...

This bent tube is the 3rd from the top in the first picture. It's the ORIGINAL Nilfisk and Tellus method of connecting the parts together, that are...

Kerrick branded three piece 50mm stainless steel bent tube and wand kit for accessories such as the round brush etc. It fits inside the 50mm rubber...

Nilfisk branded wet and dry commercial and industrial vacuum cleaner hose stainless steel 38mm bent tube fits inside hose cuff of the Nilfisk IVB 9...

Nilfisk GWD350 and the Nilfisk GWD350/2 and the Nilfisk GWD375/2 as well as the new Nilfisk VL500 75-2 Ergo large commercial wet and dry vacuum cle...

NilfiskCFM 40mm short steel hand piece, or bent end piece, to use rubber crevice tool and other more precise nozzles with. Usually for use with the...

38mm chrome steel bent tube/wand for commercial and industrial vacuum cleaners. This enables just ONE straight 38mm wand to be used with 38mm hose ...