[Okendo]_All products

Nilfisk and Tellus genuine complete black quality plastic tapered 32/38mm vacuum cleaner hose. Excellent value, very flexible, static free, complet...

38mm black swivel PVC hose cuff for 38mm plastic hose as shown in the centre of the photo. Note: They were originally grey. These swivel hose cuffs...

38mm black round commercial vacuum cleaners plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diamet...

The WAP Nilfisk-ALTO Anti-static hose for connection from the vacuum to power tools 27mm x 3.5m They are generally referred to as dust extraction h...

The Nilfisk-ALTO anti-static tool adapter cuff SIMILAR to the CURRENT ONE on the very flexible 27mm anti-static plastic hose SKU 107406091 which ca...

Nilfisk aluminium 38mm x 400mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners as supplied with the Nilfi...

Nilfisk and Tellus vacuum hose bayonet repair kit for the dustbag container end of the hoses fitted to the Nilfisk and Tellus GA70 and the Nilfisk ...

38mm internal diameter heavy duty industrial vacuum cleaner black PVC Bar Flo hose per metre length. (Heavier than Industrial Duty PN. 99738002) Th...

Original Nilfisk and Tellus 38mm to 32mm steel reducer with grey plastic friction ring. Usually for using 32mm wands and accessories on 38mm bent t...

38mm Plastic Hose Joiner Suitable for long hoses. Well-suited for car yards and car and truck rental agencies as well as other industrial and comme...

38mm PVC GVAC hose cuff. Screws on the 48mm O/D and 38mm I/D GVAC hose Pn. GARHG38 used on carpet extraction machines. They're for connecting the s...

Nilfisk and Tellus GM80 tapered commercial vacuum cleaner grey hose with ball end but NO bent tube. This is the same hose as SKU 12097500, but with...

Nilfisk 1 meter x 38mm aluminium vacuum cleaner overhead cleaning wand for cleaning potentially combustible explosive dust dust from roof pipe and ...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

This is a complete 7.5 meter solution and GVAC vacuum hose for using with a drag wand for cleaning carpets with carpet cleaning machines, or carpet...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

Nilfisk branded tough plastic commercial dry and wet pick up vacuum cleaner hard floor tool 38mm tube diameter and 400mm wide sweep path complete w...

This is a 38mm x 2.5 meter long plastic hose for early Kerrick 2 and 3 motor wet and dry vacuums and carpet extraction machines. At the moment sta...