OUT OF STOCK AGAIN!! Try and choose the individual "O" rings below!
I suggest this kit is a waste of money, and very little use at all.
Gerni domestic pressure washer standard "O" ring kit of two sets of five O-rings with grease.
Find the very popular tiny green "O" ring Pn. 3004304 HERE
Find the black "O" ring for the M21 brass screw threaded HP end of the hose here: Pn. 3001211
Find the black "O" ring for the Click&Clean spray lance where it fits into the pistol grip here: Pn. 126481125 it's probably also suitable for the click and clean jets and nozzles.
The description on the box says thus:
"2 complete kits for replacement of worn O-rings found on STANDARD accessories for GERNI DOMESTIC high pressure cleaners. Included in the kit is also grease for the lubrication of the O-rings"
NOTE: They are NOT for the pistol grips or spray gun handles.
NOTE: Scanning the QR codes on your screen, with your phone is possible, HOWEVER as of 07/12/2017 the link IS NOT CORRECT either scanned direct or from the screen
Also be aware, when buying these from the large hardware stores, people take some of these rings from the packaging!
The kit should suit the following Gerni models
Gerni CLASSIC 100.3 and the Gerni Classic 110.4 and the Gerni CLASSIC 120.4 and the Gerni CLASSIC 125.2 as well as the Gerni Super range, such as the Gerni SUPER 130.2 and the Gerni SUPER 135.2 and the Gerni Super 135.3 and the Gerni Super 140.3 PLUS and the Gerni Super 145.2 as well as the Gerni ULTIMATE 130.2
As well as the corresponding Nilfisk-ALTO models.
| Quality |
Rated 4 out of 5
|
| Design |
Rated 4 out of 5
|
Loved the service and ease of engagement.
| Quality |
Rated 5 out of 5
|
|---|---|
| Design |
Rated 5 out of 5
|
Hi Allan,
Thanks for your review, especially of our interaction! We try very hard in this very difficult time, and this helps us carry on!
Keep safe, Andy :)
Great service.
| Quality |
Rated 4 out of 5
|
|---|---|
| Design |
Rated 4 out of 5
|
Thanks David :)
Andy
O-Rings were OK but did not include seals for the trigger handle assy.
Thanks for your review. The description does not mention any seals being included. These are NOT for the pistol grips. We strongly recommend the pistol grips are not repaired, it's a fruitless exercise. Instead, replace the gun with the G5 pistol grip, which has a brass mechanism. Thanks, Andy
Andy is the most helpful guy I have come across in many years. The O rings didn't solve my problem, so he put me in touch with a technical guy from Nilfisk (Gerni parent company), who was able to sort my problem out. Without Andy's help I would have been left up a tree.