Nilfisk

NilfiskCFM 50mm hose industrial vacuum cleaner to quick connect adaptor. Used to connect soft accessories such as the rubber gulper, in the foregro...

Nilfisk-ALTO and WAP branded wet and dry commercial and industrial vacuum cleaner hose CHROME 36mm bent tube with quick release connection for trad...

Nilfisk and Tellus grey plastic bayonet ONLY for the connection of the hose that fits Into the base of the Nilfisk and Tellus GM80  and the Nilfisk...

Nilfisk and Tellus GM80 and GS80 and Nilfisk GM90 and GS90 commercial vacuum cleaner, lower dust container, hose connection and dustbag spout. This...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...

This very useful and very affordable Nilfisk-ALTO Anti-Static plastic bifurcation jount is a Y piece that fits from the 50mm inlet of the illustrat...

NilfiskCFM 70mm black rubber connecting hose sleeve for the A17 compressed air industrial vacuum cleaner. In the first photo, it's the "straight" c...

NilfiskCFM 50mm Quick Release (QR) hose connector from 50mm diameter container inlets to 50mm diameter hoses, usually via 50mm hose cuffs. Most usu...

NilfiskCFM 70mm black conductive rubber hose cuff for the large NilfiskCFM industrial vacuum cleaners. These cuffs for this style hose are a right ...

NilfiskCFM 118 industrial vacuum cleaner 40mm PVC hose cuff. SIMILAR to the cuff in the photo. They're for connecting bent tubes and wands to the h...

Nilfisk-CFM 100mm x 50mm x 50mm Bifurcation Reduction Y Joint This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 100mm ...

Nilfisk GD5 Commercial backpack vacuum cleaner and the GD10 commercial backpack vacuum cleaners hose coupling cuff to the dust container entry poin...

Nilfisk industrial vacuum cleaner hose 50mm conductive rubber muff and steel ring kit. These are usually used on the 50mm green conductive rubber h...

No longer available separately, Nilfisk and Tellus bayonet fitting rubber muff for the connection of the hose that fits Into the base of the Nilfis...

Nilfisk and Electrolux Panther GD930/S2 formerly Electrolux UZ930 Panther commercial vacuum cleaner aluminium 32mm bent tube for hose. The part at ...

Nilfisk and Tellus industrial vacuum cleaner hose 38mm conductive rubber muff and steel ring kit. These are usually used on the 38mm green conducti...

This bent tube is the 3rd from the top in the first picture. It's the ORIGINAL Nilfisk and Tellus method of connecting the parts together, that are...

Nilfisk and Electrolux Euroclean large commercial wet and dry vacuum cleaners 38mm hose cuff tank end. This is the 38mm tank end plastic hose cuff ...

Obsolete and No Longer Available, the Nilfisk 38mm Electrolux Euroclean style aluminum bent tube for 38mm plastic hose for the larger original Euro...