NilfiskCFM 50mm x 40mm x 40mm Bifurcation Reduction Y Joint For 2 x 40mm Hoses
Nilfisk-CFM 50mm x 40mm x 40mm Bifurcation Reduction Y Joint
This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 50mm inlet of the following equipment for two 40mm hoses to be used at one time by two operators, usually to clean down dusty areas in production areas.
1. NilfiskCFM industrial vacuum cleaners with 50mm inlets, such as the NilfiskCFM 118 industrial vacuum cleaner.
2. NilfiskCFM Cyclone Pre-separator lid, (for very fine dust) which can be fitted on top of the separator drum between the vacuum cleaner unit and where the bulky, or fine particled debris, or product is being picked from.
3. NilfiskCFM 50 or 100 litre pre-separators with lids with 50mm inlets which can be fitted on top of the separator drum between the vacuum cleaner unit and where the bulky, or fine particled debris, or product is being picked from.
There are other sizes and configurations available.
At the moment, as postage within Australia is capped at a maximum of $25, maximise the saving on postage and buy some of the related parts below!