Fast Sucking Items That Constantly Sell!

NilfiskCFM 50mm cream coloured PVC hose cuff for the NilfiskCFM127 and the NilfiskCFM137 also the NilfiskCFM S2 and the NilfiskCFM S3 Used on both,...

NilfiskCFM 70mm container inlet, steel reducer to hose with 50mm internal diameter. This part fits in the inlet to the NilfiskCFM127 and the Nilfis...

Complete male bayonet hose cuff for the container end of the 32mm non-tapered vacuum hose of the Nilfisk VP300 HEPA and the Nilfisk VP300 Eco Befor...

NilfiskCFM industrial vacuum cleaner 70mm to 40mm steel reducer for hoses. This usually fits in the 70mm container inlet of NilfiskCFM127 and the N...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

NilfiskCFM 40mm black antistatic rubber hose cuff for the NilfiskCFM 118 industrial vacuum cleaner and other smaller industrial CFM vacuum cleaners...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

This is a 36mm tapered screw-on swiveling hose cuff that connects with a push fit to bent tubes and round brushes etc. on upright vacuum cleaners s...

NilfiskCFM 118 industrial vacuum cleaner 40mm PVC hose cuff. SIMILAR to the cuff in the photo. They're for connecting bent tubes and wands to the h...

NilfiskCFM 70mm black conductive rubber hose cuff for the large NilfiskCFM industrial vacuum cleaners. These cuffs for this style hose are a right ...

35mm Pistol Grip or Bent End Piece. It fits 35mm accessories onto the 32mm flexible black plastic vacuum hose. These are usually used on the Nilfis...

51mm plastic hose joiner for joining or repairing light duty 50mm plastic vacuum cleaner hose. The 51mm refers to the INTERNAL diameter of the hose...

Nilfisk bayonet kit for the base and dust bag container of the Nilfisk and Tellus GM80 the Nilfisk GM90 and GS90 and the Nilfisk and Tellus GA71 GS...

This bent tube is the 3rd from the top in the first picture. It's the ORIGINAL Nilfisk and Tellus method of connecting the parts together, that are...

Kerrick branded 50mm black rubber screw on hose cuff for accessories such as the crevice tool and wands etc. Suits the Kerrick JumboVac industrial ...

This is a Kerrick 38mm tank end screw-on swiveling hose cuff for wet and dry vacuums and carpet extraction machines It fits simply and effectively ...

Nilfisk branded wet and dry commercial and industrial vacuum cleaner hose stainless steel 38mm bent tube fits inside hose cuff of the Nilfisk IVB 9...

WAP and Nilfisk-ALTO 50mm tank end hose cuff for 27mm Antistatic plastic vacuum hose. The cuff has a slow taper on it allowing for easy connection ...

NilfiskCFM 70mm container inlet, stainless steel reducer to hose with 50mm internal diameter. This part fits in the inlet to the NilfiskCFM127 and ...

This is the a PAIR of 51mm anti-static black plastic hose cuffs for the 51mm Condiflex antistatic hose Pn. GARHD51AS that can be used with NilfiskC...