Fast Sucking Items That Constantly Sell!

Nilfisk and Tellus genuine complete black quality plastic tapered 32/38mm vacuum cleaner hose. Excellent value, very flexible, static free, complet...

38mm black swivel PVC hose cuff for 38mm plastic hose as shown in the centre of the photo. Note: They were originally grey. These swivel hose cuffs...

38mm black round commercial vacuum cleaners plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diamet...

The WAP Nilfisk-ALTO Anti-static hose for connection from the vacuum to power tools 27mm x 3.5m They are generally referred to as dust extraction h...

The Nilfisk-ALTO anti-static tool adapter cuff SIMILAR to the CURRENT ONE on the very flexible 27mm anti-static plastic hose SKU 107406091 which ca...

Nilfisk aluminium 38mm x 400mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners as supplied with the Nilfi...

Original Nilfisk and Tellus 38mm to 32mm steel reducer with grey plastic friction ring. Usually for using 32mm wands and accessories on 38mm bent t...

38mm Plastic Hose Joiner Suitable for long hoses. Well-suited for car yards and car and truck rental agencies as well as other industrial and comme...

Nilfisk and Tellus GM80 tapered commercial vacuum cleaner grey hose with ball end but NO bent tube. This is the same hose as SKU 12097500, but with...

Nilfisk 1 meter x 38mm aluminium vacuum cleaner overhead cleaning wand for cleaning potentially combustible explosive dust dust from roof pipe and ...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

This is a 38mm x 2.5 meter long plastic hose for early Kerrick 2 and 3 motor wet and dry vacuums and carpet extraction machines. At the moment sta...

Nilfisk original green conductive rubber wire compete reinforced tapered industrial vacuum cleaner hose from 38 to 32mm. Note: for the photo I used...

GVAC very flexible 38mm hose for stand alone carpet extraction machines such as the Nilfisk AX400 and the Advance Aquaclean and the Nilfisk AX410 a...

Nilfisk-Advance AX410 on-board upholstery hand extraction tool for cleaning chairs and furniture. Stainless Steel upholstery tool with a single Jet...

The WAP and Nilfisk-ALTO polished stainless steel and brass upholstery tool for cleaning seats and chairs in hotels, aged care facilities, churches...

Nilfisk bayonet kit for the base and dust bag container of the Nilfisk and Tellus GM80 the Nilfisk GM90 and GS90 and the Nilfisk and Tellus GA71 GS...

38mm soft grey genuine Nilfisk plastic cone. This is used as original equipment on the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum clea...

NilfiskCFM 38mm clear antistatic EOLO hose by meter length. This clear hose with a cream spiral and built-in copper conductor, has a 38mm inside di...

Kerrick branded 50mm black plastic crevice tool, it fits INTO 50mm internal diameter HOSE CUFFS. We have ONLY 3 left. It will also fit ONTO THE 38m...

PLEASE CHECK THIS PART CLOSELY Described as Kerrick branded 38mm black plastic 50cm extension wand. These were supplied with original equipment in ...

Kerrick 40cm wide dry pick-up nozzle with nylon bristles and a 38mm neck that can be interchanged with a 32mm neck and 50mm neck. It's plastic cons...

Kerrick branded 38mm black plastic crevice tool, it fits ONTO THE TAPERED 38mm HOSE CUFF. It will also fit INTO 50mm internal diameter HOSE CUFFS, ...

Kerrick 40cm wide wet pick-up squeegee nozzle with 38mm neck that can be interchanged with a 32mm neck and 50mm neck. It's plastic construction. Su...

Kerrick branded 38mm black round plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diameter is 38mm....

This is a two meter 38mm steel wand set with suction regulation for early Kerrick 2 and 3 motor wet and dry vacuum cleaners At the moment standard...

This is a Kerrick 38mm tank end screw-on swiveling hose cuff for wet and dry vacuums and carpet extraction machines It fits simply and effectively ...

Nilfisk 38mm Stainless Steel pair of wands 50cm long for the IVB9 Wet and Dry Vacuum Cleaner supplied with the 38mm trade and industry hose set. Th...

Nilfisk branded wet and dry commercial and industrial vacuum cleaner hose stainless steel 38mm bent tube fits inside hose cuff of the Nilfisk IVB 9...

Very affordable 3meter flexible vacuum cleaner hose complete, for an extremly affordable option for the following vacuum cleaners the Nilfisk IVB3 ...

Budget 3meter x 38mm diameter flexible vacuum cleaner hose complete, for a more affordable option for the following vacuum cleaners the Nilfisk IVB...