Commercial Nilfisk Barrel Vacuum Cleaners For Dry Use

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

This is a 38mm x 2.5 meter long plastic hose for early Kerrick 2 and 3 motor wet and dry vacuums and carpet extraction machines. At the moment sta...

This is a 36mm tapered screw-on swiveling hose cuff that connects with a push fit to bent tubes and round brushes etc. on upright vacuum cleaners s...

Kerrick branded 50mm black plastic crevice tool, it fits INTO 50mm internal diameter HOSE CUFFS. We have ONLY 3 left. It will also fit ONTO THE 38m...

PLEASE CHECK THIS PART CLOSELY Described as Kerrick branded 38mm black plastic 50cm extension wand. These were supplied with original equipment in ...

Kerrick branded 38mm black plastic crevice tool, it fits ONTO THE TAPERED 38mm HOSE CUFF. It will also fit INTO 50mm internal diameter HOSE CUFFS, ...

Kerrick branded 50mm stainless steel extension tube or wand set for the floor tool etc. It suits the Kerrick JumboVac industrial vacuum cleaner At ...

Kerrick branded three piece 50mm stainless steel bent tube and wand kit for accessories such as the round brush etc. It fits inside the 50mm rubber...

Kerrick branded 50mm black rubber screw on hose cuff for accessories such as the crevice tool and wands etc. Suits the Kerrick JumboVac industrial ...

Kerrick branded 50mm black PVC crevice tool with 6cm long tool tip suits the Kerrick JumboVac industrial vacuum cleaner At the moment standard post...

Kerrick branded 38mm black round plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diameter is 38mm....

This is a two meter 38mm steel wand set with suction regulation for early Kerrick 2 and 3 motor wet and dry vacuum cleaners At the moment standard...

This is a Kerrick 38mm tank end screw-on swiveling hose cuff for wet and dry vacuums and carpet extraction machines It fits simply and effectively ...