Commercial Nilfisk Barrel Vacuum Cleaners For Dry Use

38mm black round commercial vacuum cleaners plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diamet...

Obsolete and No Longer Available, choose SKU 22409100 The Nilfisk and Tellus plastic bayonet rubber muff retaining ring for the connection of the h...

Nilfisk and Tellus vacuum hose bayonet repair kit for the dustbag container end of the hoses fitted to the Nilfisk and Tellus GA70 and the Nilfisk ...

Original Nilfisk and Tellus 38mm to 32mm steel reducer with grey plastic friction ring. Usually for using 32mm wands and accessories on 38mm bent t...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

This is a 38mm x 2.5 meter long plastic hose for early Kerrick 2 and 3 motor wet and dry vacuums and carpet extraction machines. At the moment sta...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...

No longer available separately, Nilfisk and Tellus bayonet fitting rubber muff for the connection of the hose that fits Into the base of the Nilfis...

Kerrick branded 50mm black plastic crevice tool, it fits INTO 50mm internal diameter HOSE CUFFS. We have ONLY 3 left. It will also fit ONTO THE 38m...

PLEASE CHECK THIS PART CLOSELY Described as Kerrick branded 38mm black plastic 50cm extension wand. These were supplied with original equipment in ...

Kerrick branded 38mm black plastic crevice tool, it fits ONTO THE TAPERED 38mm HOSE CUFF. It will also fit INTO 50mm internal diameter HOSE CUFFS, ...

Kerrick branded 38mm black round plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diameter is 38mm....

This is a two meter 38mm steel wand set with suction regulation for early Kerrick 2 and 3 motor wet and dry vacuum cleaners At the moment standard...

This is a Kerrick 38mm tank end screw-on swiveling hose cuff for wet and dry vacuums and carpet extraction machines It fits simply and effectively ...

Nilfisk 38mm x 400mm Heavy Duty Aluminium Carpet Nozzle, simply a wide flat plate. ETA for this would be 3 months ex-Europe check out SKU GARFTLCB1...

38mm aluminium wand for the Nilfisk and Electrolux Euroclean UZ878 wet and dry vacuum cleaner and the Nilfisk WD245 and the Electrolux IQ245 wet ...

38mm West German quality Wessel combination nozzle floor tool for carpet and hard floor use. Popularly used on the old Fantovac vacuum cleaners. A...