All

Nilfisk and Tellus genuine complete black quality plastic tapered 32/38mm vacuum cleaner hose. Excellent value, very flexible, static free, complet...

38mm grey swivel PVC hose cuff for 38mm plastic hose as shown in the centre of the photo. These swivel hose cuffs, are great to use on the 38mm int...

38mm black round commercial vacuum cleaners plastic dust brush, with nylon bristles, it fits ONTO 38mm vacuum wands. This means the INTERNAL diamet...

The WAP Nilfisk-ALTO Anti-static hose for connection from the vacuum to power tools 27mm x 3.5m They are generally referred to as dust extraction h...

The Nilfisk-ALTO anti-static tool adapter cuff SIMILAR to the CURRENT ONE on the very flexible 27mm anti-static plastic hose SKU 107406091 which ca...

Nilfisk and Tellus vacuum hose bayonet repair kit for the dustbag container end of the hoses fitted to the Nilfisk and Tellus GA70 and the Nilfisk ...

Nilfisk aluminium 38mm x 400mm adjustable wheeled floor nozzle WFN for industrial wet and dry commercial vacuum cleaners as supplied with the Nilfi...

Obsolete and No Longer Available, choose SKU 22409100 The Nilfisk and Tellus plastic bayonet rubber muff retaining ring for the connection of the h...

Original Nilfisk and Tellus 38mm to 32mm steel reducer with grey plastic friction ring. Usually for using 32mm wands and accessories on 38mm bent t...

38mm internal diameter heavy duty industrial vacuum cleaner black PVC Bar Flo hose per metre length. (Heavier than Industrial Duty PN. 99738002) Th...

38mm Plastic Hose Joiner Suitable for long hoses. Well-suited for car yards and car and truck rental agencies as well as other industrial and comme...

Nilfisk 40cm grey rubber lips for the original aluminium wheeled floor nozzle, same as the one in the photo, and supplied with 10 screws. They are ...

38mm PVC GVAC hose cuff. Screws on the 48mm O/D and 38mm I/D GVAC hose Pn. GARHG38 used on carpet extraction machines. They're for connecting the s...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

This is a complete 7.5 meter solution and GVAC vacuum hose for using with a drag wand for cleaning carpets with carpet cleaning machines, or carpet...

Nilfisk and Tellus GM80 tapered commercial vacuum cleaner grey hose with ball end but NO bent tube. This is the same hose as SKU 12097500, but with...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

Nilfisk 1 meter x 38mm aluminium vacuum cleaner overhead cleaning wand for cleaning potentially combustible explosive dust dust from roof pipe and ...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...