All

This page is here for information only. Originally a pack of 5 brown paper dustbags, these bags were changed to a pack of 5 White, Synthetic Dispos...

The Nilfisk GD1005 and Nilfisk HDS2000 commercial vacuum cleaner pack of 10 litre paper commercial vacuum cleaner dustbags. There are FIVE in this ...

Now obsolete, this package of Five 50 litre white synthetic fabric dustbag, that are usually used with hazardous dust for Tellus and Nilfisk brande...

Primary air filter for the Nilfisk combination machines the Captor CR1100 and the Nilfisk-Advance Captor CR1200 and the Nilfisk Captor CR1400 also ...

1/2" x 3/8" BTP Threaded barbed adapter for solution hose, only ONE available. At the moment standard postage within Australia, is capped at a maxi...

NilfiskCFM 50mm internal diameter flexible steel 3 meter industrial vacuum cleaner hose for hot work such as kilns, bakery ovens, pet cemeteries et...

Nilfisk-Alto Aero 26-21 Push2Clean BASIC Wet and Dry Vacuum Cleaner - Replaced By The Nilfisk VL200 Nilfisk Aero 26 Push2Clean offers a semi-automa...

NilfiskCFM 70mm container inlet, steel Quick Connect to hoses with 70mm internal diameter. The part with the internal flange (LHS) fits in the inle...

NilfiskCFM Inlet 50-40 CFM Iron Reducer, so the NilfiskCFM 118 industrial vacuum cleaner for example, can use the 40mm hoses. In the picture, it's ...

The Nilfisk BA600 walk behind battery powered automatic floor scrubber clean water tank barbed adapter for solution hose. At the moment standard po...

Nilfisk GB1133 industrial vacuum cleaner and the Nilfisk GB1033 3 phase industrial vacuum cleaner and the Nilfisk GB933 3 phase industrial vacuum c...

Nilfisk industrial vacuum cleaner hose 50mm x 38mm steel reducer tube.This enables the 38mm wands and tubes to be used with the 50mm hoses by using...

NilfiskCFM127 industrial vacuum cleaner handle release cable to lower and lift the dust container to and from the ground. Obsolete and No Longer Av...

NilfiskCFM 137 3 Motor Industrial Vacuum Cleaner With Hose and Tool Kit Now the CFM 137 has been replaced by the NilfiskCFM S3 A compact and portab...

NilfiskCFM127 industrial vacuum cleaner rear pushing handle and the lever, for lifting and lowering the dust container Obsolete and No Longer Avail...

Nilfisk-Advance IVB7X Series ATEX wet and dry vacuum cleaner lower stainless steel dust container to motor head black adaptor ring. Would also suit...

This is a NilfiskCFM 50mm black conductive hose cuff for the NilfiskCFM137 and the NilfiskCFM127 and the NilfiskCFM S2 and the NilfiskCFM S3 indust...

Nilfisk T75 L100 7.5 kW 3 Phase 43kPa Industrial Vacuum Cleaner Indent Item Only Allow 16 Weeks For Delivery. A basic, very powerful, industrial va...

NilfiskCFM 3997W C 22Kw 3 Phase 44kPa Heavy Duty Vacuum Cleaner With Compressed Air Cleaned Cartridge Filters Giving Constant Airflow For Very Fin...

NilfiskCFM T40 L100 4.3 kW 3 Phase Industrial Vacuum Cleaner Kit Complete Indent Item Only Allow 16 Weeks For Delivery.   Find Brochure HERE The Ni...

Nilfisk-CFM 70mm x 50mm x 50mm x 50mm Trifurcation Reduction X Joint This NilfiskCFM galvanised Trifurcation joint is an X piece of ducting that fi...

Nilfisk-CFM 50mm x 50mm x 50mm Bifurcation Reduction Y Joint This CFM galvanised bifurcation jount is a Y piece of ducting that fits in the 50mm i...

This is the standard NilfiskCFM 50mm hose kit complete, usually sold with the NilfiskCFM S2 and the NilfiskCFM S3 or the NilfiskCFM T22  The kit co...