All

This is an older Kerrick 38mm O/D bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

Nilfisk branded tough plastic commercial dry and wet pick up vacuum cleaner hard floor tool 38mm tube diameter and 400mm wide sweep path complete w...

This is a 38mm x 2.5 meter long plastic hose for early Kerrick 2 and 3 motor wet and dry vacuums and carpet extraction machines. At the moment sta...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...

Nilfisk original green conductive rubber wire compete reinforced tapered industrial vacuum cleaner hose from 38 to 32mm. Note: for the photo I used...

Nilfisk-Advance AX410 on-board upholstery hand extraction tool for cleaning chairs and furniture. Stainless Steel upholstery tool with a single Jet...

The WAP and Nilfisk-ALTO polished stainless steel and brass upholstery tool for cleaning seats and chairs in hotels, aged care facilities, churches...

Nilfisk 38mm commercial black anti-static vacuum cleaner hose per meter It is used with the Nilfisk IVB series of industrial wet and dry vacuum cle...

NilfiskCFM 38mm clear antistatic EOLO hose by meter length. This clear hose with a cream spiral and built-in copper conductor, has a 38mm inside di...

38mm I/D soft grey genuine Nilfisk plastic cone or crevice tool. This is used as original equipment on the Nilfisk and Tellus GA71 GS81 and GM81 in...

Nilfisk bayonet kit for the base and dust bag container of the Nilfisk and Tellus GM80 the Nilfisk GM90 and GS90 and the Nilfisk and Tellus GA71 GS...

No longer available separately, Nilfisk and Tellus bayonet fitting rubber muff for the connection of the hose that fits Into the base of the Nilfis...

Nilfisk and Tellus industrial vacuum cleaner hose 38mm conductive rubber muff and steel ring kit. These are usually used on the 38mm green conducti...

Nilfisk and Electrolux Euroclean large commercial wet and dry vacuum cleaners 38mm hose cuff tank end. This is the 38mm tank end plastic hose cuff ...

Obsolete and No Longer Available, the Nilfisk 38mm Electrolux Euroclean style aluminum bent tube for 38mm plastic hose for the larger original Euro...

Nilfisk industrial vacuum cleaner 38mm curved brush for cleaning away sticky dusts from overhead ducts and pipes, up to 100mm in diameter. Good hou...

Kerrick branded 50mm black plastic crevice tool, it fits INTO 50mm internal diameter HOSE CUFFS. We have ONLY 3 left. It will also fit ONTO THE 38m...

PLEASE CHECK THIS PART CLOSELY Described as Kerrick branded 38mm black plastic 50cm extension wand. These were supplied with original equipment in ...

Kerrick 40cm wide dry pick-up nozzle with nylon bristles and a 38mm neck that can be interchanged with a 32mm neck and 50mm neck. It's plastic cons...

Kerrick branded 38mm black plastic crevice tool, it fits ONTO THE TAPERED 38mm HOSE CUFF. It will also fit INTO 50mm internal diameter HOSE CUFFS, ...

Kerrick 40cm wide wet pick-up squeegee nozzle with 38mm neck that can be interchanged with a 32mm neck and 50mm neck. It's plastic construction. Su...