38mm Accessories

38mm grey swivel PVC hose cuff for 38mm plastic hose as shown in the centre of the photo. These swivel hose cuffs, are great to use on the 38mm int...

The Nilfisk-ALTO anti-static tool adapter cuff SIMILAR to the CURRENT ONE on the very flexible 27mm anti-static plastic hose SKU 107406091 which ca...

Obsolete and No Longer Available, choose SKU 22409100 The Nilfisk and Tellus plastic bayonet rubber muff retaining ring for the connection of the h...

Nilfisk and Tellus vacuum hose bayonet repair kit for the dustbag container end of the hoses fitted to the Nilfisk and Tellus GA70 and the Nilfisk ...

38mm Plastic Hose Joiner Suitable for long hoses. Well-suited for car yards and car and truck rental agencies as well as other industrial and comme...

38mm PVC GVAC hose cuff. Screws on the 48mm O/D and 38mm I/D GVAC hose Pn. GARHG38 used on carpet extraction machines. They're for connecting the s...

Nilfisk 38mm chrome bent tube suits the Nilfisk and Tellus GA71 GS81 and GM81 industrial vacuum cleaner and both the Nilfisk GS82 and GM82 Industri...

Nilfisk and Tellus aluminium 50-38mm industrial vacuum cleaner hose reducer, from 50mm container to 38mm hose kits so that the Nilfisk GS82 and GM8...

This is an older Kerrick 38mm bent tube with sliding suction regulator. The swivelling hose cuff pushes into the back of it. It's for older wet and...

Currently an exclusive part offered by TVD. NOTE: They are NOT for use in ATEX Zones. The earlier Nilfisk-ALTO Attix traditional left-handed thread...

Obsolete and No Longer Available, the Nilfisk 38mm Electrolux Euroclean style aluminum bent tube for 38mm plastic hose for the larger original Euro...

Nilfisk and Tellus industrial vacuum cleaner hose 38mm conductive rubber muff and steel ring kit. These are usually used on the 38mm green conducti...

Nilfisk bayonet kit for the base and dust bag container of the Nilfisk and Tellus GM80 the Nilfisk GM90 and GS90 and the Nilfisk and Tellus GA71 GS...

Nilfisk and Tellus bayonet fitting black square rubber gasket with dimples for the connection of the hose that fits Into the base of the Nilfisk an...

No longer available separately, Nilfisk and Tellus bayonet fitting rubber muff for the connection of the hose that fits Into the base of the Nilfis...

Nilfisk and Electrolux Euroclean large commercial wet and dry vacuum cleaners 38mm hose cuff tank end. This is the 38mm tank end plastic hose cuff ...

This is a NilfiskCFM 38mm to 40mm black conductive hose cuff for industrial vacuum cleaners. The black conductive hose cuff is fitted on each end ...

Black plastic Multi-fit connector on the container end of the hose of the Nilfisk IVB3 and  Nilfisk IVB5 and the Nilfisk IVB7 wet and dry commercia...

This is a Kerrick 38mm tank end screw-on swiveling hose cuff for wet and dry vacuums and carpet extraction machines It fits simply and effectively ...

Nilfisk branded wet and dry commercial and industrial vacuum cleaner hose stainless steel 38mm bent tube fits inside hose cuff of the Nilfisk IVB 9...

38mm chrome steel bent tube/wand for commercial and industrial vacuum cleaners. This enables just ONE straight 38mm wand to be used with 38mm hose ...

Nilfisk 38mm chrome steel ball end fitting for repairing or custom making 38mm industrial vacuum cleaner hoses Such as used on the Nilfisk GM80 and...

Nilfisk industrial vacuum cleaner hose 50mm x 38mm steel reducer tube.This enables the 38mm wands and tubes to be used with the 50mm hoses by using...

Nilfisk 38mm industrial vacuum cleaner hose rubber protection rings. They're for protecting hoses from rough surfaces, for example car detailing in...

Nilfisk 38mm industrial vacuum cleaner hose steel bayonet kit. Usually fitted on the green conductive rubber hoses that were supplied with the indu...